power1
power1 is a power module, capable of delivering well-regulated 5.3 V power supply, as well as analog current and battery voltage measurements to a compatible flight controller, while passing through 60 amperes of continuous current to the ESC.
It is currently the smallest analog power module on the market.
Coming soon!
Applications
- Supplying power and power measurements for Pixhawk-compatible flight controllers
Specifications
Electrical
- Input: 6 V - 36 V (2S - 8S)
- Output: 5.3 V, 3 A, overcurrent, overtemperature and short circuit protected
- Distribution current: 60 A continuous, 80 A in burst (please note the current limits of the connectors and wires you intend to use)
- Maximum measurement current: 110 A
- Amperes per volt: 33.33
- Volts per volt: 16.46
- Connectors:
- JST GH 6 pin for analog power connection to the flight controller - compatible with the Dronecode Foundation's Pixhawk power connector standard
- solder pad pair for 5.3 V and GND output
- 1 large, 1 small solder pad pair for battery power output
- Low EMI and switching noise
Mechanical
- Dimensions: 17.6 x 17.6 x 7 mm
- Weight: 4 g
Compatible flight controllers
The following flight controllers are known to be compatible with this power module:
- Holybro Pixhawk 6C/Pixhawk 6C Mini
- mRo Pixracer Pro
- AirMind MindPX/MindRacer
However, any flight controller either compatible with the Pixhawk power connector standard, or capable of accepting +5 V power supply input and analog voltage and current measurements via any other connector or solder pad, should be able to utilize this power module.
Last update: 19.02.2025